Ads 468x60px

Pages

Kamis, 09 Januari 2014

Samsung Launched The GALAXY Note 10 1 2014 Edition



Samsung today announced the launch of its newest flagship tablet device, GALAXY Note 10.1 2014 Edition in Singapore. The 2014 edition expands on the advanced productivity and creativity leadership delivered by the original Samsung GALAXY Note 10.1. 


In addition to enabling productivity, the device has been redesigned with a sleek, light, slim frame that is both fashionable and portable. New design characteristics, like a soft and textured touch-back cover with delicate stitching, inspire a sense of elegance and sophistication.


The GALAXY Note 10.1 2014 edition features a 10.1” display with four times the pixel density than the original Note 10.1. It measures 243.1 X 171.4 X 7.9mm and 547g (LTE version). Some of the key features includes  Action Memo, Enhanced Multi Window and Samsung KNOX.

The GALAXY Note 10.1 2014 Edition (32GB) will be available in Singapore from October 19 and 26 October 2013 for Classic White and Jet Black respectively for $998 for (LTE, without contract) and $798 (WiFi version) at telecommunication operators, major consumer electronics and IT stores, and Samsung Experience Stores. 



Check out the press release below for more information and specifications.

Press Release (Click to hide or show)

Read More..

Rabu, 08 Januari 2014

The Neglected Compact Camera

I intended to do my shutter therapy today with the Olympus PEN E-PL1, only to realize on the way out of the door that the battery was not charged, and the camera had been used for two shooting sessions already. Initial alternative was to either use the DSLR E-520 or E-5, but I made a change of mind in that very last minute, to take out my much ignored compact point and shoot camera Panasonic Lumix LZ8. If you know that I have this compact camera (which I bought 3 years ago) stashed somewhere, you must have been following my blog for quite a while now, and I have you to thank for. The Panasonic LZ8 was my everyday camera that I used for documentation purposes on for my day to day work on a construction site, and I paid little attention to using the camera on my own non-work activities. However, a camera is still a camera, and why not give this lowly, budget, neglected, looked-down upon camera a spin? Will the camera work for street shooting?

The camera that I use for day to day work, but almost never for my shutter therapy. 



All images in this entry (except the above image of course) were taken with Panasonic Lumix DMC-LZ8.

Afternoon Smile

Face Down

Spiraling upward

Suitcase

Something in your hair

Piggyback

Relevance of Compact Point and Shoot Camera

I am not sure where the compact point and shoot category fits into anymore in todays modern digital photography world. Most people who wanted to venture into photography will surely skip this small sensor, small body, non-changeable lens and non-professional looking cameras, jumping straight to monstrous sized, professional grade, high performance, most technologically advanced system out there, such as the full frame DSLR system. No, people are not exactly that interested in entry level DSLR anymore these days. Where does this leave the compact camera? I am very, very sure the sales of compact cameras are declining to a sure death, the question is when. Mobile phone photography is taking over the world now, for those who refuse to lug around those gigantic neck-breaking DSLR bodies with bazooka lenses. For those who would want to consider compact cameras for light-weight, small-sized and easy to carry around reasons, they would go for high-end compact or "bridge" compact systems, with slightly larger image sensors and more advanced controls, such as the Panasonic LX-7, Sony RX100, and Canon G12. Those cameras are not exactly compact point and shoot anymore, considering the much higher price range, and more sophisticated packed with features and functions. Piecing all the above puzzles into a larger picture, I cannot help but wonder if my Panasonic LZ8, a budget, lowly compact is still relevant anymore. Should I just give up on it? I do not even shoot much with it !!


Using the Compact on the Street

As I looked back into what I have been doing for the past month, I have come to a very stark realization: I do not need high end cameras to do all the experimentation that I have carried out (flash photography on the street, and the slow shutter speed techniques). In fact, all that I have been shooting with the DSLR E-520 and kit lens, with a manual flash, the similar results can be obtained with a compact camera, such as the Panasonic LZ8. Hard to believe, but I can assure you, it is true, and I have photographs in this entry to show. 

It all comes down to your own preferences and how you perceive street photographs. As for me, my usual style includes using shallow depth of field (bokeh, oh beautiful bokeh), producing very sharp images (wonderful 50mm macro lens), and displaying glorious, natural colors. Nonetheless, most street photographs you will find in the world are against such technical execution. You will find mostly grainy photographs, that could be out of focus, or soft, or even blurred due to motion captured in the photograph. The sharpness was never that important. Furthermore, the popularly used zone-focusing system renders everything in focus and clear in the photograph, with no place for bokeh or shallow depth of field. Undeniably, almost all of the best and most popular street photographs are shown in black and white, with the absence of color. If we were to take what a "typically good street photograph" is against my usual shooting style, I would say I most certainly have disqualified in all criteria. I am fully aware of this, but I love what I have been doing, and that is not going to change. At the same time, I also have been experimenting with the black and white, gritty, grainy, not so sharp output, no-bokeh, harsh with flash-in-your-face shots for the past month. 

Why do you use an F1.4 lens if you decide to shoot at F/11 or narrower for zone focusing to have everything in focus/sharp? Why do you need such large image sensor (APS-C or full frame) that gives you so much dynamic range, just for you to throw it all away when you boosted the contrast so that the shadow is blackened and the highlights and blown to pure whiteness? What is the point of having so many megapixels when at the end of the day you purposely induce motion blur and create very soft dreamy output? For those "typically good street photographs" output, I dont think you need to use something so expensive and powerful. 

Now enters the compact camera. With the small sensor (smallest you can find really) you get massive depth of field. Set the aperture to F/5.6 or smaller, you get something equivalent to "zone focusing" effect. With the gritty, high contrast, harsh, slightly out of focus, black and white kind of outcome, there really is no need for very good lens, even the tiny built in lens would do. Flash photography on the street? No problem, almost all compact cameras have a built in flash, and they work relatively well too. So why not use a compact camera on the street?


A Prostitute. 
Hip Shot

Two Wheels

Broken Window

Stretches

Vegetables on my Shoulder


Please do take note that using flash, creating very harsh, high contrast black and white and dark-toned, gritty images are not usually my style, or preference when shooting on the street, I believe in trying out different thing, and exploring more possibilities. I want to be able to see and experience different techniques first hand, before I can give any comments, and when I do, I can be more objective and clear about the topic, because I have done it, and I have put myself in doing it again and again, not just a simple, quick encounter. 

So what did I do with the Panasonic LZ8 this time? The camera has manual controls, full PASM, and I switched between P (programme exposure) and S (shutter Priority). When I am shooting normal subjects, with direct point and shoot and nothing extra fancy, I use the P (programme exposure), with ISO set to Auto and exposure compensation +0.7 EV (I prefer my images to be brighter when they are in B&W). As you have probably noticed in this entry, quite a few shots were taken with motion blur in mind, hence for slowing down the shutter speed, I switched to the S (shutter priority), using 1/10sec to 1/30sec, depending on how fast the subject moves. I switched the Image Stabilization OFF for smoother panning results. I also engaged the in camera black and white conversion. Mostly I shoot at wide open (equivalent 32mm) but when I did close up portraits, I zoomed in at least 2x to avoid ugly distortions on the facial profile. The focusing was not very fast (as the same with most budget compact point and shoot cameras) but with some pre-planning and pre-focusing (focusing on nearby subjects) it was not much of an issue. For some shots that I needed to use flash, the in camera flash worked just fine. 

I do have my set of complains with this camera. The main problem is shutter lag, and it was bad enough for me to have some important misses, which was frustrating. I can blame the camera, but the camera can blame me at the same time, for not using it enough, to understand its focusing behaviour and time myself more efficiently as I execute my shots. It is true I spent very little time with this camera, and not knowing it thoroughly, it was not easy to work with it. At 8MP output, the resolution was quite poor, lacking details, and the file viewed at 100% is full of compression and sharpening artifacts. As expected, even at ISO400, noise can be quite an issue, even on monotone images. Traces of luminance noise can be seen throughout the images, especially those with more shadow. 

I Chew My Shirt

Searching for the Answers to the Universe

Telescope

Busy Street

Train

Todays street shooting session with the Panasonic LZ8 compact point and shoot camera made me realize that all the experimentation with the more "typically good street photographs" do not require high end cameras, in fact, they can be achieved with relatively cheaper, and lower-end cameras. Indeed, in street photography, the focus has never been about how sharp your image is, or how beautiful the colors you have captured. It has nothing to do with the 3D effect that your lens can deliver, or how much dynamic range your image sensor is capable of showing. What makes street photographs work? Good subject content, with emotion and drama in the image, composed creatively and timed strategically to capture that moment. 

What do I believe in? Do I agree with the "typically good street photographs"? Lets just say, I am still very young (in terms of photography age) to make any conclusions, and I shall not make any. There are so much more to learn and try out. Lets not tie ourselves down with too many rules and restrictions. I want to stay open to more possibilities, and be flexible when I approach street photography. Therefore, besides shooting within my comfort zone, I dared myself to try different techniques. And of course, pushing myself on the street with even the compact camera that nobody seems to care any more. 

Does any of you have a compact camera still, and do you still use your compact camera frequently? Do share some thoughts. 

Read More..

Selasa, 07 Januari 2014

Print bed leveling aid

Since the front print bed leveling screw head is covered by the print bed, you can screw on two M5 nuts onto to bottom of the front level adjustment screw and tighten the two nuts against each other.

Now, you can hold the leveling screw with the bottom of the two nuts to loosen the lock nut. Once the lock nut is loose, you can use the interlocked two nuts to turn the level adjustment screw with the print bed in place. 

No need to tighten the lock nut back up. There is enough tension / friction from the spring to prevent the screw from turning by itself.

Read More..

Minggu, 05 Januari 2014

Cannot have the same name of Javascript function on 3 differents pages!

Today I have spent 5 hours to find out the bug on my websites. My page structure is something like this : main page has 3 boxes - man, woman, animal. On the main page, I use jquery to fetch the information from man.php, woman.php, animal.php and display them onto the 3 boxes. Each of 3 pages (man.php, woman.php, animal.php) have a javascript function :
function showresponddiv(messagedivid){
        jQuery.get("showRespLive.php, function(data2) {
            $(#dialog .poptext).append(data2);
        });
};


The bug was when a user click on an information in the box of man by onclick="javascript:showresponddiv(this.id)", supposedly it should call the function showresponddiv() on man.php, but it fail to do so. It will call the function showresponddiv() on other page like woman.php or animal.php. Why? It is because I use jquery to show them 3 pages together into 1 main page. So actually the function showresponddiv() was declare 3 times on the main page.

To fix the bug, just change the name of the functions to showresponddiv2() and showresponddiv3().
Read More..

Cartridges and Filament flow errors


Since there have been several users including myself with filament cartridge issues, and several posts about it in the CubeX user group, I thought I should post about it here with some possible temporary help to keep printing.
This might help you to get by and use a problem cartridge.
(Attempt at own risk).
Each cartridge has a little chip at the bottom where the filament exits, that makes contact with the CubeX when the cartridge is installed. The chip contains information about what type of cartridge it is and possibly records the amount left in the cartridge.
If you have a cartridge read error,  you should check that the contacts in the CubeX and on the cartridge are clean and try to re-insert it. If that does not help try the cartridge in a different cartridge slot if you have a duo or trio. I have had only one cartridge read error and it went away when I re-inserted it a few times.      Otherwise I dont have more help on that one, except power cycling the CubeX and trying again.
If your cartridge is binding (filament wont pull out easily) and or you are getting a filament flow error you can carefully open the cartridge and run the spool externally.
 
(Note:   A filament flow error might not always be due to a binding cartridge.)

In some cases the filament is wound up crossed onto the spool and hanging the spool externally wont help either because it keeps tangling on the spool. (At least you can see what is going on with the spool hanging externally). In that case unwinding and rewinding up the filament on the spool is the only fix.
(Note: Be careful to not damage the chip at the bottom of the cartridge, and careful with the inner cardboard spool since it is only lightly glued together.)
Here is what I did:
This has worked great for me with the 3 cartridges I had binding issues with. One I had to glue the spool back together, but got it useable off the external hanger.

Take the cartridge out of the CubeX.
Use a exactor knife to cut the label at the cartridge seam.

To open the cartridge, start at bottom of the cartridge next to the chip. Insert a small flat screwdriver to release the clip next to the chip. Try to keep the chip in its place.
 
Then do the same on the clip next to it and move all the way around to open the cartridge case.
 

Carefully take the cardboard spool out. Handle the spool with care so it does not fall apart, since it is only lightly glued together.
 
Once the spool is taken out of the cartridge, make sure the chip is in its place (if the chip fell out, make sure to position and orient it correctly, otherwise it wont make contact with the CubeX) and then close up the empty cartridge (with chip in place).
Also, when removing the spool from a cartridge, make sure to write onto the spool, which cartridge it belongs to, so you dont get them mixed up if you have multiple cartridges of same color etc..
The empty cartridge can now be inserted back into the CubeX.
Inspect the spool and how the filament is wound up on it. You might have to unwind some filament, where it is bound or tangled up, and then loosely wind the filament back up on the spool.
For the cardboard spool, you need a holder with a smooth rod so the spool can rotate on it.
Here is a hanger you can print yourself (in PLA), but you also need a smooth 1/2" rod (should be very smooth / polished) with 8-32 threaded holes on each end and two 8-32 x 1/2" SHC screws and washers  and one large fender washer.
 

STL file for spool hanger:   Spool holder .stl file
SolidWorks file for spool hanger:  Spool holder SolidWorks file
 Or you can rig up anything similar as long as the spool has a very smooth rod to hang off and rotate on.
 
Take the filament end, and make sure to get a clean cut of the filament so it will feed in properly. The filament should be still round at the end after clipping it. If not, you can use a exactor knife to slightly taper the end of the filament which might help feeding it back into the guide and filament feed motor.

After prepping the filament end, you can then just feed the filament directly from the hanging spool into the filament guide in front of where you inserted the empty cartridge.

Use the cartridge replace menu. (You can leave the empty cartridge in place during the process).
Once the filament is feed thru and extruding , you are ready to go.
If you have problems feeding the filament and the motor wont pull the filament in, go into the menu with the 240C icon. There you can heat up the jet by double clicking on the TGT temperature, it will toggle between 0 C, 195C and 230C. Use 230C.  Then you can double click on the feed speed to get the motor feeding at different speeds, 8 or 12 should work.
 
 
Keep pushing the filament in, pull in and out, eventually it should go.
I had a difficulties last time at a filament change, but eventually after I re-cut the end of the filament again, it feed in ok.
 
 
After using the cartridge, I stick it in a plastic bag with the desiccant from the cartridge, till I use it again.
 
 
 
 


Read More..

Sabtu, 04 Januari 2014

Another new Software version 1 06

Software version 1.06 just got released, shortly after the 1.05 release.  - SEE NOTE below !

NOTE:  Maybe you want to wait downloading this version there might be a bug that can cause a filament flow error.
I am getting a bad printfile when using jet 2 or jet 3.


See Release notes for changes.
Release notes:
Software 1.06 Release notes PDF

CubeX Maintainance document:
CubeX Maintainance check PDF


(Note: If you get an message "you do not have privileges to install etc....." during the install, try the install again by right clicking on the setup.exe file and select "Run as administrator".

 Installation Instructions:
- Uninstall previous installation of CubeX Software.
- Extract the cubex_software_win.zip folder
- Double click on setup.exe to begin installation
- The installer will direct thru the install process
- after installation complete, a CubeX Shortcut will be placed on the Desktop

Link to download new software version:
http://cubify.com/resource.aspx?link_id=14
Read More..

32GB pendrive RM90


Do you want to win this pendrive for free? You can join the contest here : http://www.facebook.com/ye5blog?v=app_4949752878

You can click the picture above to enlarge it.
Read More..